inherit
136262
0
Jun 24, 2013 21:59:18 GMT -8
nowdocking
1,086
January 2009
nowdocking
|
Post by nowdocking on Aug 15, 2017 13:03:19 GMT -8
For the record, I removed that censored word, but it made no difference in how the plugin worked.
|
|
#00AF33
Official Code Helper
19529
0
1
Nov 19, 2012 14:18:28 GMT -8
Todge
**
17,285
January 2004
todge
|
Post by Todge on Aug 15, 2017 16:10:01 GMT -8
For the record, I removed that censored word, but it made no difference in how the plugin worked. OK... Can you please remove the Spoiler Plugin you currently have, refresh the page, then install this version. Give it a go and let me know how it goes.
|
|
inherit
136262
0
Jun 24, 2013 21:59:18 GMT -8
nowdocking
1,086
January 2009
nowdocking
|
Post by nowdocking on Aug 15, 2017 16:47:41 GMT -8
Okay Todge -- did all that and it's still not working as a spoiler. I left the test posts in place so you can see. Using image tags for both the title and the body, it comes out as two images on the page with the closing tag showing at the end. Using image tags for the title and no image tags for the body, it comes out as the title image on the page with spoiler code and the body image url stuck to it.
|
|
#00AF33
Official Code Helper
19529
0
1
Nov 19, 2012 14:18:28 GMT -8
Todge
**
17,285
January 2004
todge
|
Post by Todge on Aug 17, 2017 15:13:09 GMT -8
Censored words list has the word s p o i l e r replaced by s p o i l e r=s p o i l e r (<-- but written without spaces). Todge wrote: A plugin could be made to do that within posts, yes. It's beyond the realms of the Spoiler plugin though. Should I put in a separate request for that, or leave it here since this OP was not specifically about the Spoiler plugin? OK.. I've ditched the image tags in the spoiler title, and have instead added an option for you to enter a maximum width the title image can be. Can you please remove the version you currently have and try installing the plugin again from the same link as before. You will need image tags in the spoiler body, but only the image URL in the spoiler title.
|
|
inherit
136262
0
Jun 24, 2013 21:59:18 GMT -8
nowdocking
1,086
January 2009
nowdocking
|
Post by nowdocking on Aug 17, 2017 16:15:55 GMT -8
Todge -- still won't work. I did what you said and left the failed attempts in place if you want to see. Tried in Opera and in IE.
|
|
#00AF33
Official Code Helper
19529
0
1
Nov 19, 2012 14:18:28 GMT -8
Todge
**
17,285
January 2004
todge
|
Post by Todge on Aug 18, 2017 11:34:24 GMT -8
Todge -- still won't work. I did what you said and left the failed attempts in place if you want to see. Tried in Opera and in IE. It seems to be working for me.. Be aware that if you are using the Preview side of the editor, the spoiler body will need to be in HTML, not UBBC coding.
|
|
inherit
136262
0
Jun 24, 2013 21:59:18 GMT -8
nowdocking
1,086
January 2009
nowdocking
|
Post by nowdocking on Aug 18, 2017 13:22:28 GMT -8
Can you please remove the version you currently have and try installing the plugin again from the same link as before. You will need image tags in the spoiler body, but only the image URL in the spoiler title. The reason it works for you and was not working for me was because I did not read carefully what you wrote. I was putting the image tags in the title. In quoting your last two posts in the test thread, I saw that you were not putting them in the title, but in the body, so I came over here and re-read what you wrote. Sorry! Anyway, it now works for me. The part I don't understand how to do is this, where you wrote: OK.. I've ditched the image tags in the spoiler title, and have instead added an option for you to enter a maximum width the title image can be.What do I add to the image tags to indicate the max width, 100%, for example? Thank you very much for all of this!
|
|
#00AF33
Official Code Helper
19529
0
1
Nov 19, 2012 14:18:28 GMT -8
Todge
**
17,285
January 2004
todge
|
Post by Todge on Aug 19, 2017 15:18:33 GMT -8
Can you please remove the version you currently have and try installing the plugin again from the same link as before. You will need image tags in the spoiler body, but only the image URL in the spoiler title. The reason it works for you and was not working for me was because I did not read carefully what you wrote. I was putting the image tags in the title. In quoting your last two posts in the test thread, I saw that you were not putting them in the title, but in the body, so I came over here and re-read what you wrote. Sorry! Anyway, it now works for me. The part I don't understand how to do is this, where you wrote: OK.. I've ditched the image tags in the spoiler title, and have instead added an option for you to enter a maximum width the title image can be.What do I add to the image tags to indicate the max width, 100%, for example? Thank you very much for all of this! No worries.. At least it's working for you now. The width of the title image is controlled from within the plugin settings. There is now an Image Title Width option in the settings. You can control the maximum width of the plugin title from there. This is a very old plugin and is long overdue for a rewrite. So, at some point in the not-too-distant-future, there should be a new version which will make it easier to use images as the spoiler title.
|
|
inherit
136262
0
Jun 24, 2013 21:59:18 GMT -8
nowdocking
1,086
January 2009
nowdocking
|
Post by nowdocking on Aug 19, 2017 19:29:20 GMT -8
... The width of the title image is controlled from within the plugin settings. There is now an Image Title Width option in the settings. You can control the maximum width of the plugin title from there. I apologize for asking something else, but I can't find where there is an Image Title Width option in the settings. There are places for a button, for a default title, and for title and body colors, but that's it. I'm looking in Spoiler Settings.
|
|
#00AF33
Official Code Helper
19529
0
1
Nov 19, 2012 14:18:28 GMT -8
Todge
**
17,285
January 2004
todge
|
Post by Todge on Aug 20, 2017 4:47:43 GMT -8
... The width of the title image is controlled from within the plugin settings. There is now an Image Title Width option in the settings. You can control the maximum width of the plugin title from there. I apologize for asking something else, but I can't find where there is an Image Title Width option in the settings. There are places for a button, for a default title, and for title and body colors, but that's it. I'm looking in Spoiler Settings. It be right there....
|
|
inherit
136262
0
Jun 24, 2013 21:59:18 GMT -8
nowdocking
1,086
January 2009
nowdocking
|
Post by nowdocking on Aug 20, 2017 7:31:32 GMT -8
I apologize for asking something else, but I can't find where there is an Image Title Width option in the settings. There are places for a button, for a default title, and for title and body colors, but that's it. I'm looking in Spoiler Settings. It be right there.... But this is what I see in my Spoiler Settings:
|
|
#00AF33
Official Code Helper
19529
0
1
Nov 19, 2012 14:18:28 GMT -8
Todge
**
17,285
January 2004
todge
|
Post by Todge on Aug 20, 2017 10:39:42 GMT -8
Ah-ha... Then you need to update your plugin. Remove the current version, and replace it with this one. You should then have the Image Title Width option.
|
|
inherit
136262
0
Jun 24, 2013 21:59:18 GMT -8
nowdocking
1,086
January 2009
nowdocking
|
Post by nowdocking on Aug 20, 2017 12:12:58 GMT -8
Okayyyy Todge! I have replaced the plugin with the new one and it works great -- thank you very much. Two comments: After clicking "add spoiler" a proboards drop-down appears at the top of the page with a url and you have to click "ok". -- Is that normal? In the Spoiler Settings, under Spoiler Title, it states: "An image can be used a the spoiler title by using an image URL." But actually the image tags have to go in the body and no image tags in the title or it doesn't work.
|
|
#00AF33
Official Code Helper
19529
0
1
Nov 19, 2012 14:18:28 GMT -8
Todge
**
17,285
January 2004
todge
|
Post by Todge on Aug 20, 2017 16:57:14 GMT -8
Okayyyy Todge! I have replaced the plugin with the new one and it works great -- thank you very much. Two comments: After clicking "add spoiler" a proboards drop-down appears at the top of the page with a url and you have to click "ok". -- Is that normal? Ooops.. I forgot to remove that. Please replace your it with this version instead..That is correct. Only insert an image URL in the title.
|
|
inherit
136262
0
Jun 24, 2013 21:59:18 GMT -8
nowdocking
1,086
January 2009
nowdocking
|
Post by nowdocking on Aug 21, 2017 11:35:06 GMT -8
WHEW! Todge, I don't know what to say about all the work you did, but THANK YOU!
|
|