Site won't load need help

[(00110)]

Forum URL: systemsadmin.proboards56.com

I was messing with the coding and I must have deleted something but now the site won't load up. Someone help me please

[Zetacon]

Try this, this is from the FAQ.

If you (admins) experience problems with your board loading, and a code is suspected of causing the problem, you have 2 basic methods.

1. if you still have your board open, hit 'back' on your browser to where you added the code (headers page), you should be able to remove or edit the code(s)

2. To access your headers, follow these steps.
edit your url to this
your-board.proboards.com/index.cgi?action=login&NOHEADERS=1

Type in your username and password, click login.

then IGNORE THE PAGE CONTENT

then edit the url to this
your-board.proboards.com/index.cgi?action=headersfooters&NOHEADERS=1

You will now be able to modify your headers and footers.
copy codes to notepad before removing them, then go and recheck if the code is correct.

note:
your-board.proboards.com is YOUR URL

[(00110)]

Oh my Gosh you are so helpful I thank you so much

[Zetacon]

No problem.

[jugglinninja]

zetacon said:

Try this, this is from the FAQ.

If you (admins) experience problems with your board loading, and a code is suspected of causing the problem, you have 2 basic methods.

1. if you still have your board open, hit 'back' on your browser to where you added the code (headers page), you should be able to remove or edit the code(s)

2. To access your headers, follow these steps.
edit your url to this
your-board.proboards.com/index.cgi?action=login&NOHEADERS=1

Type in your username and password, click login.

then IGNORE THE PAGE CONTENT

then edit the url to this
your-board.proboards.com/index.cgi?action=headersfooters&NOHEADERS=1

You will now be able to modify your headers and footers.
copy codes to notepad before removing them, then go and recheck if the code is correct.

note:
your-board.proboards.com is YOUR URL

Just a piece of advice I've learned while here. There's no point in copying the entire sticky thread for this. Actually, you're not supposed to.

If you're going to give a member support on an issue that concerns their forum and they need a way to get into their forum via login or headers/footers, always put their URL in the Example URL given. Like so:

systemsadmin.proboards56.com/index.cgi?action=login&NOHEADERS=1

systemsadmin.proboards56.com/index.cgi?action=headersfooters&NOHEADERS=1

It makes it easier for the member and more convinent.

I'm not trying to hassle you, just thought I'd let you know.