inherit
57762
0
Nov 1, 2006 12:37:11 GMT -8
TeamZipWay
100
September 2005
teamzipway
|
Post by TeamZipWay on Sept 25, 2005 11:40:53 GMT -8
Forum URL: rcetc.proboards61.comI had this problem yesterday except now it's different. I can't get in to any of my boards. I get an error message saying: IE cannot open rcetc.pro.... Action aborted. I have no Idea wht header or footer did this. I took out the most recent one I added and it didn't help.
|
|
inherit
40728
0
Jun 23, 2011 10:58:09 GMT -8
pluckyclown
1,397
April 2005
jamielm
|
Post by pluckyclown on Sept 25, 2005 11:47:26 GMT -8
I have viewed Boards in IE and BT Yahoo! Browser. Is it on a specific board. And what exactly does it do when this message comes up?
- Batista Fan
|
|
inherit
57762
0
Nov 1, 2006 12:37:11 GMT -8
TeamZipWay
100
September 2005
teamzipway
|
Post by TeamZipWay on Sept 25, 2005 11:49:59 GMT -8
it is on every board. I only can click OK on the message, and when I do, puts up the evil "Page Cannot be Displayed" screen. The wierd thing is that the page fully loads and then it pops up.
It does not do it on pages that only show subboards, but it does on all the actual boards.
|
|
inherit
57762
0
Nov 1, 2006 12:37:11 GMT -8
TeamZipWay
100
September 2005
teamzipway
|
Post by TeamZipWay on Sept 25, 2005 11:58:11 GMT -8
It is something at the bottom of the page. I can tell because I have dialup and when I turn off the accelerator, it loads almost the whole page and shows the error when it gets to the very bottom.
|
|
inherit
57762
0
Nov 1, 2006 12:37:11 GMT -8
TeamZipWay
100
September 2005
teamzipway
|
Post by TeamZipWay on Sept 25, 2005 12:10:41 GMT -8
I found the problem. It was a problem with the most recent shop code. I'll try and re-paste it into my footers.
|
|
inherit
22517
0
Apr 30, 2009 18:49:13 GMT -8
Bradley
Has a new webhost. :) Needs to transfer a lot of stuff. :-/
5,246
April 2004
ccworldwebmaster
|
Post by Bradley on Sept 25, 2005 15:43:51 GMT -8
It's a known issue with certain people on IE. Until I (or some other good coder) can reproduce the error, it cannot be fixed.
Note: If you used it before the 23rd try clearing you cache and trying it then. I made a small edit and some people said it works now.
|
|